- Slide the installation handle into the water tank from above. Please ensure the appropriate installation size in advance to ensure the smooth subsequent installation
|
- Slide the mounting handle into the rubber washer and then the steel support washer, making sure that the base is aligned with the sink and tightened, and that the outlet extends into the sink.
|
- .Then connect the part at 1/2 of the inlet pipe to the pipe of the glass washer
|
- Determine whether your new glass washer is supplied with cold or hot water. Loosen the existing faucet supply line from the corner stop on the selected side. Screw the supplied tee onto the angle stop in place of the supply line disconnected in the previous step. Thread the faucet supply pipe and the 3/8 "end of the supply pipe through the tee. Thread the 1/2" end of the supply pipe through the mounting handle.
|