Feature



Description

Normally Closed Valves 1/4 Inch 220VAC 240VAC ; Valves for FLUID CONTROL: ACECREW ValvesNormally Closed Valves 1/4 Inch 220VAC 240VAC ; Valves for FLUID CONTROL: ACECREW Valves

NC 1/4 Inch 220VAC 230VAC 240VAC

Seal NBR (aka Buna-N, Perbunan, and nitrile rubber); 1/4 Inch NORMALLY CLOSE VALVES ; 145psiSeal NBR (aka Buna-N, Perbunan, and nitrile rubber); 1/4 Inch NORMALLY CLOSE VALVES ; 145psi
Installation:

  • Clean pipe threads before installation.
  • Wrap the pipe threads with Teflon Tape.
  • Check and match the flow direction with the arrow on the bottom of the valve.
  • Coil terminals are not polarity sensitive.
  • NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.

AceCrew Normally Closed Electric Solenoid Valve

1/4" AC 220V - 240V Normally Closed

At AceCrew, we engineer products that meet industrial standards and are made with high-quality components. We can attest to this because we use all of the items we sell in our own manufactured products. We have over 40 years of experience in fluid control and are the OEM supplier to major first-tier valve brands.

  • Body Material : Forged high-quality solid brass
  • Operation Mode : N/C (normally closed)
  • Pipe Size : 1/4" NPT female (18 TPI)
  • Voltage : AC 220V - 240V
  • Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
  • Operating Temperature : 15-125 °F (-10~50 °C)
  • Media : Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, low viscosity fluid, etc. (Do NOT use with gasoline)
Applications: Industrial grade highly reliable
Operation Type: 2-way 2-position direct acting
Operation Mode: Normally closed (valve opens when coil is energized)
Flow Direction: Unidirectional (follow the arrow on valve body)
Flow Rate: Cv = 0.5
Current: 0.1 Amp
Coil: Copper wire in resin-molded casing
Seal: NBR (aka Buna-N, Perbunan, and nitrile rubber)
Insert: Stainless steel (plunger, spring, etc.)
Media Temperature: 15-180 °F (-10~80 °C)
Pipe Size: 1/4" NPT female (18 TPI)
Orifice Diameter: 5/32" (4 mm)
Weight: 14 oz
Mounting Thread (Base) : M4
Connectors : DIN

Internal ValveInternal Valve

Valve SealValve Seal

PlundgerPlundger

Mounting Threads (Base) M4Mounting Threads (Base) M4

Body Construction :

Forged high-quality solid brass. A corrosion-resistant, tough, and durable material which will last a long time.

Plunger & Seal :

NBR (aka Buna-N, Perbunan, and nitrile rubber) a more durable seal with good abrasion and tear resistance. Plunger and springs crafted from stainless steel.

Use:

General purpose use valve for water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, low viscosity fluid, etc. (Do NOT use with gasoline)

Threads :

AceCrew follows National Standards for pipe thread in the U.S.A. We use NPT.