Feature



Description

VITON Solenoid Valve 1/2 Inch ; 220VAC, 230VAC, 240VAC ; Direct acting valve ; Solid brass ; For GasVITON Solenoid Valve 1/2 Inch ; 220VAC, 230VAC, 240VAC ; Direct acting valve ; Solid brass ; For Gas

VITON 1/2" 220VAC 230VAC 240VAC

Valve Flow DirectionValve Flow Direction
Installation:

  • Clean pipe threads before installation.
  • Wrap the pipe threads with Teflon Tape.
  • Check and match the flow direction with the arrow on the bottom of the valve.
  • Coil terminals are not polarity sensitive.
  • NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.

AceCrew Normally Closed Electric Solenoid Valve -VITON-

VITON 1/2" AC 220V AC230V AC240V Normally Closed

At AceCrew, we engineer products that meet industrial standards and are made with high-quality components. We can attest to this because we use all of the items we sell in our own manufactured products. We have over 40 years of experience in fluid control and are the OEM supplier to major first-tier valve brands.

  • Body Material : Forged high-quality solid brass
  • Operation Mode : N/C (normally closed)
  • Pipe Size : 1/2" NPT
  • Voltage : AC 220V - 240V
  • Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
  • Operating Temperature : 15~125 °F (-10~50 °C)
  • Media : Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, gasoline, low viscosity fluid, etc.
Applications: Industrial grade highly reliable
Operation Type: 2-way 2-position direct lift diaphragm
Operation Mode: Normally closed (valve opens when coil is energized)
Flow Direction: Unidirectional (follow the arrow on valve body)
Flow Rate: Cv = 4.5
Current: 0.1 Amp
Coil: Copper wire in resin-molded casing
Seal: Viton (aka FKM/FPM, fluorocarbon)
Insert: Stainless steel (plunger, spring, etc.)
Media Temperature: 15-250 °F (-10~120 °C)
Pipe Size: 1/2" NPT female (14 TPI)
Orifice Diameter: 19/32" (15 mm)
Weight: 1 lb 6 oz

Solid Brass Electric Solenoid Valve ; AceCrew Solenoid Valves; Half Inch 220VAC; VITON Seal; 145psiSolid Brass Electric Solenoid Valve ; AceCrew Solenoid Valves; Half Inch 220VAC; VITON Seal; 145psi

Valve SealValve Seal

PlundgerPlundger

AceCrew Valves; Solenoid Valves for gas Air and water; Multi purpose Solenoid Valves; USA SellerAceCrew Valves; Solenoid Valves for gas Air and water; Multi purpose Solenoid Valves; USA Seller

Body Construction :

Forged high-quality solid brass. A corrosion-resistant, tough, and durable material which will last a long time.

Plunger & Seal :

Viton (aka FKM/FPM, fluorocarbon) provides continuous sealing for higher temperature applications . Plunger and springs crafted from stainless steel.

Use:

General purpose use valve for water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, low viscosity fluid, etc. (Do NOT use with gasoline)

Threads

AceCrew follows National Standards for pipe thread in the U.S.A. we use NPT.