Feature

●【UNIVERSAL DESIGN】- This AC24V G1/2"Plastic Water Electric Solenoid Valve Normally Closed Water Inlet Flow Switch for use with water, air, ect
●【FEATURE】- This is an Inlet Feed Water Solenoid Valve for hot Liquid not more than 100℃, turn on water when system start and cut off water when system stop.
●【DESIGN】- Inlet hole has Filter,Flow Direction: Unidirectional(Follow the Arrow on Valve Body) ; Operation Mode: N/C(Normally Closed).
●【APPLICATION】- Plastic Water Solenoid Valve used in automatic control system: solar automatic water supply, infrared induction ware, water dispenser, water control machine, automatic water dispenser, water heater, campus card equipment, etc.
●【ATTENTION】- It will become hot when it works because there are so many coils inside. It’s normal and safe phenomenon.


Description

Specification:
Product Name : Water Solenoid Valve
Model: FPD-270A
Color : White
Material: Plastic,Metal
Voltage ：AC24V
Connector Angle :180 Degree
Inlet and Outlet Thread Size : G1/2"
Solenoid Valve Type : Normally Closed
Working pressure: 0.02~0.8mpa (3~114 psi)
Operating temperature: 0~90 Degree Celsius
Total Size : 85mm x 36mm x 57mm /3.35 "x 1.42" x 2.24" (LxWxH)

Package Content:
1pcs x Water Solenoid Valve

Description:
1. The water solenoid valve selects the corresponding voltage and temperature according to the actual situation when selecting type.
2. When install the solenoid valve, medium flow direction must be consistent with the direction arrow as shown in the valve body, the valve must be installed in horizontal pipe runs. Solenoid valve coil keep in a vertical position, the valve can not be put in places with splashing water or water leakage.
3. If the solenoid valve is closed or blocked, please open the top four screws to clean the inner impurities.
4. During use solenoid valve should be regularly cleaning dirt on the surface of the movable iron core and the piston, sealing gasket should be checked at the same time in dismounting, damaged should be replaced timely when found.
5. Before installing the solenoid valve, pipeline should be cleaned.
6.Used in automatic control system: solar automatic water supply, infrared induction ware, water dispenser, water control machine, automatic water dispenser, water heater, campus card equipment, etc.