Feature

●? Brand : ACE CREW Industrial Solenoid Valve - 1/2 Inch AC 220V-240V NORMALLY OPEN Brass Solenoid Valve - Industrial Solenoid Valve - for low viscosity fluid , Water, Air, natural gas -
●? Size & Voltage : 1/2 Inch & AC 220V-240V ; ?Current: 0.1 Amp ; ?Wattage : 24 Watt
●? Operation Type: 2-way 2-position direct lift diaphragm
●? Operation Mode : Normally Open Solenoid Valve (valve closes when coil is energized)
●? Pipe Size : 1/2 Inch NPT female (14 TPI)
●? Media: Solenoid Valve for use Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, low viscosity fluid, etc. (Do NOT use with gasoline)
●?Coil: Copper wire in resin-molded casing ?Connectors: DIN ?Body Material : Brass
●?Insert: Stainless steel (plunger, spring, etc.) ?Seal: NBR (aka Buna-N, Perbunan, and nitrile rubber) ?Diaphragm: NBR (fiber-reinforced)


Description

Normally Open Valves 1/2 Inch 110VAC; ACE CREW Valves ; VALVES FOR LIQUID GAS AND AIR CONTROLNormally Open Valves 1/2 Inch 110VAC; ACE CREW Valves ; VALVES FOR LIQUID GAS AND AIR CONTROL

NO 1/2 Inch 220VAC 230VAC 240VAC

Normally open valves 1/2 inch 220VAC, ACECREW VALVESNormally open valves 1/2 inch 220VAC, ACECREW VALVES
Installation:

  • Clean pipe threads before installation.
  • Wrap the pipe threads with Teflon Tape.
  • Check and match the flow direction with the arrow on the bottom of the valve.
  • Coil terminals are not polarity sensitive.
  • NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.

AceCrew Normally Open Electric Solenoid Valve

1/2" AC 220V - 240V Normally Open

At AceCrew, we engineer products that meet industrial standards and are made with high-quality components. We can attest to this because we use all of the items we sell in our own manufactured products. We have over 40 years of experience in fluid control and are the OEM supplier to major first-tier valve brands.

  • Body Material : Forged high-quality solid brass
  • Operation Mode : N/O (normally open)
  • Pipe Size : 1/2" NPT
  • Voltage : AC 220V - 240V
  • Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
  • Operating Temperature : 15~125 °F (-10~50 °C)
  • Media : Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, low viscosity fluid, etc. (Do NOT use with gasoline)
Applications: Industrial grade highly reliable
Operation Type: 2-way 2-position direct lift diaphragm
Operation Mode: Normally open (valve closes when coil is energized)
Flow Direction: Unidirectional (follow the arrow on valve body)
Flow Rate: Cv = 4.5
Current: 0.1 Amp
Coil: Copper wire in resin-molded casing
Seal: NBR (aka Buna-N, Perbunan, and nitrile rubber)
Insert: Stainless steel (plunger, spring, etc.)
Media Temperature: 15~180 °F (-10~80 °C)
Pipe Size: 1/2" NPT female (14 TPI)
Orifice Diameter: 19/32" (15 mm)
Weight: 2 lb 0 oz

Internal ValveInternal Valve

Valve SealValve Seal

PlundgerPlundger

ThreadsThreads

Body Construction :

Forged high-quality solid brass. A corrosion-resistant, tough, and durable material which will last a long time.

Plunger & Seal :

NBR (aka Buna-N, Perbunan, and nitrile rubber) a more durable seal with good abrasion and tear resistance. Plunger and springs crafted from stainless steel.

Use:

General purpose use valve for water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, low viscosity fluid, etc. (Do NOT use with gasoline)

Threads

AceCrew follows National Standards for pipe thread in the U.S.A. we use NPT.