Feature

●Multiple Alarm Modes: Burglar alarm with 130DB loud,continue 30 seconds alarm; Doorbell Sound as Door Chime,Alert someone come in;Di-Di Intermittent sound:Remind someone to close refrigerator door/medical kit.Switch off can stop all working.
●125dB Burglar Alarm: The Door Window Alarm on Burglar Alarm,130db loud when door or window opens, helps deter intruder thieves and alert residence.
●Easy to install: Use Double-sided tape, tape it on a window door or anywhere you need, then all done! No any wiring or screws needed.Fit for Home, office, apartment, garage, pool door, medicine box, refrigerator etc. Also for trip.
●Instant Alarm Reminder:The minimum trigger distance is 0.59inch.The alarm will be triggered and alarm immediately when  doors or windows be opened.
●Double-side magnetic sensor alarm; More places can use it than single side sensor.（IT FITS ON FLAT DOOR AND FRAME.)


Description

In order to protect your family and valuables from burglars,protect your children from danger.You should need a system in place that can notify you of any attempt to gain access to your home through your doors or windows.

The EverNary Security Door/Window Alarm provides a simeply-to-use, cost-effective security solution to protect you and your family.

This door Entry sensor with 130 dB loud alarm sound can help to deter the intruder, wake or alert you and possibly alert neighbors.

The alarm is also extremely easy to use. The window/door alarms design with easy Switch button and controls for simple operation.

The wireless door alarm have 4 modes--- Arm/DIDI/Panic/Doorbell mode.You can also TURN OFF it. Not only a DIY door and window alarm, but also a door open chime/ pool alarm for kids safety or helps notify you if kids/pets or visitors coming/going or important doors forget to close.

Trigger distance: ＞0.59inch(15mm).The alarm will be triggered when the two parts of the magnet sensor are separated more than 0.59inch.

Arm/Disarm/Panic/Doorbell/DIDI Remind modes

Door and Window Security Alarms Door and Window Security Alarms

How to Change Working Modes:

wireless door bellwireless door bell

wireless window alarmwireless window alarm

pool door alarmpool door alarm

Step1:

Turn on the switch button.

Step 2:

Press SET button.

1. When hear one BI sound: Alarm 30s when door open;

2. When hear BI BI sounds: set as doorbell ring;

3. When hear BI BI BI sounds:Alarm when door open / Stop when door close;

4. When hear BI BI BI BI sounds: set as DI DI notice mode.

Step 3:

Separate the two parts of the magnet sensor.Confirm whether the mode is the one you want.

If it is not,according to step 2 to set again.

If it is,complete setup.

Easy to Install

Easy to installEasy to install
door alarmdoor alarm

window alarmwindow alarm
Small Size

Alarm Device Size: 2.56*1.3*0.59 inch

Magnet Size:1.42*0.4*0.51 inch

Technical Parameters:

Double-side Trigger.

Working temperature: -10℃ to 50 ℃

Lound enough: Burglar alarm --130dB

Operating Voltage: 3 * LR44 battery (inclued)

Trigger distance: 15 mm

Package:

Magnetic Sensor Alarm x 7

3M Double-side Sticker x 14

LR44 x 21 (inclued)

Instruction Manual x1

pool door alarm door window alarm caregiver pager window break sensor alarm Caregiver alert button
Door Window Pool Alarm with 1 Remote Control + 2 Magnetic Sensor Door Window Pool Alarm with 2 Remote Controls + 3 Magnetic Sensor Vibration Caregiver Pager 52 Ringtones 1 Portable Receiver+1 Call Button Window Break Sensor 3Pack Vibration Caregiver Pager 52 Ringtones 2 Portable Receiver+2 Call Button
Operate range 50 ft 50 ft 260ft 3 Level Sensitivities 260ft
Volume Level 4 Working Modes 4 Working Modes 4 Volume Levels(25dB-110dB)+Vibration Siren 4 Volume Levels(25dB-110dB)+Vibration