Feature

●The discharge board burn-in module can display voltage and current when discharging constant current, visually reflecting the discharge conditions.
●Classical digital tube display, clear display, intuitive and durable, compared to LCD, it is more resistant to high temperature.
●100% power burn-in in factory, suitable for assembly of power adapter fully-automatic burn-in cabinet.
●This electronic load uses original IR power tube and double high-spe-ed ball bearing fan, with big fin heat sink, which is not afraid of dust and can guarantee the stability for a long time use, power redundancy is no less than 50% (25).
●Voltage and current wiring connectors are separated, with appropriate connection, it can eliminate the influence of wire resistance to voltage.


Description

Specifications:
Power Supply Voltage: DC12V(±5%) (equipment supply voltage)
Maximum Load Voltage: 100V
Constant Current Discharge Adjusting Range: 0-20A
Work Mode: Constant current mode (C-C)
Maximum Discharge Current Error: 0.7%-0.01A
Maximum Discharge Power: 250W
Size: 13*9*11.5cm/5.1*3.5*4.5in
Weight: 879g(approx.)

Instruction:
1. Connect to 12V power supply then power on to electronic load mode. Make sure it is at stop condition (knob clockwise is minimum) then connect the tested power supply to the input power port, pay attention to the polarity.
2. Rotate knob to set constant current.

Package Includes:
1 x Electronic Load

Note:
1. Since it works openly, there is no voltage and power limitation, but normal work should be below 100V, 250W.

2. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.