Feature
●STABLE: This boost converter has voltage stabilizing function.Non-isolation boost module, very stable.
●WIDELY APPLICATION: Suitable for capacitance charging, or power supply of electromagnetic gun, electronic equipment. Can be test power supply of voltage or glow tube.
●SHORT CIRCUIT PROTECTION: This boost converter adopted short circuit protection design, will not be easily burned.
●EASY OPERATION: use 4pcs 3mm screw to install it.No-welding terminals.
●REVERSE INPUT PROTECTION: This boost converter support reverse input protection.
Description
Multifunction
- Short Circuit Protection: Support(please do not pull short circuit arc directly at output. Direct short circuit arc is likely to damage the rectifier devices. Please connect power resistors in series to limit current)
- Over Current Protection: Support(reduce output voltage when input current is over 4.5A)
- Over Voltage Protection: Support(reduce output voltage when it is over 410V)
- Reverse Input Protection: Support(fuse)
Application
- Capacitance charging, or power supply of electromagnetic gun.
- Power supply of electronic equipment.
- Test power supply of voltage or glow tube.
Installation Method:
Four 3mm screw No-welding terminals
Specifications
- Input Voltage:(2 options, select through the jumper wire on the back of PCB)
- A, 8-16V
- B, 10-32V(default)
- Working Temperature: -40 to +85 degrees (ambient temperature too high, please strengthen cooling)
- Frequency: 75KHz
- Conversion Efficiency: 88%(max)
- Input Current: 5A(Maximum)
- Quiescent Current: 15mA(will be higher when 12V to 50V)
- Output Voltage: ±45-390V(default ±50V)
- Output Current: Maximum 0.2A(associated with input, output voltage)
- Output Power: 40W(Maximum 70W)