Feature

●【1/2-inch x 18-inch & 40 Grit】Abrasive sanding belt fits any sander that uses 1/2-inch x 18-inch sanding belt,40 Grit
●【Aluminum Oxide Abrasive Materials】Sand belt sandpaper is with aluminum oxide abrasive materials,sharp and durable,strong grinding
●【Compact Interface】The interface of sander belt is tight and compact,so it is not easy to break apart in use,easy to use, long usage life
●【Widely Application】Abrasive sand belt use for surface smoothing, removing smaller imperfections and marks on wood, plastic, fiberglass, and both ferrous metal (steel, stainless steel, cast iron, carbon steel) and non-ferrous metals (aluminum, titanium, brass, bronze, copper)
●【Pay Attention To】When installing, it is necessary to distinguish the positive and negative directions.Installation according to the installation direction on the back of abrasive belt. Installing the opposite direction will cause problems such as non-wear resistance, band breakage and so on

[60 Grit]




[180 Grit]




[40 Grit]





Description

11

2-12-1

2-22-2

2-32-3

Aluminum oxide grain coated, adopt anti-static sand-planting craft

Tight seam, strong and durable

Backing has excellent tensile strength, moisture-proof, washable, without deformation under high temperature

33

  • Coarse Sanding: 40 Grit--120 Grit

Coarse grit sandpaper is a good choice for rough sanding and removing layers of old paint quickly, including rough sanding of polyester putty, steel plate and wood material.

  • Medium Sanding: 120 Grit--600 Grit

Medium grit sandpaper makes a good starting point for most projects, feather sanding, grinding of polyester putty, aluminum plates, fiberglass, metal materials and wall shaping.

  • Fine Sanding: 600 Grit--1200 Grit

Finer grit sandpaper is great for fine sanding of polyester putty, paint primer and old paint, used for fine grinding and fine shaping of various materials.

  • Extra Fine Sanding: 1200 Grit--3000 Grit

Extra fine grit sandpaper is used for light sanding between coats of finish and to sand metal, hardwood, stone and other non-metallic materials.

  • Super Fine Sanding: 3000 Grit--10000 Grit

Super fine grit sandpaper is mainly used for mirror polishing of metal, stone, non-ferrous metal, water-based paint, glass and other objects.

44
66
66
7-17-1

Measurement Methods

After the belt is flattened, the measured length is about half of the total length of the belt. Adding 1/4 "~ 1/2" on this basis is the circumference suitable for the belt sander. The width of the belt is equal to or less than the width of the belt pulley. Or you can choose to cut the used sanding belt to measure.

Note: If the width of the abrasive belt exceeds the width of the grinder pulley, it cannot be used.

7-17-1

Measure Methods

7-27-2

Measure Methods

7-37-3

Use Guide

7-47-4

Measurement