Feature
●Split Solar Panel: Compared to conventional solar lamps, we separate the solar panel and the main light body, you can install the solar panel in a sunny place with the supplied 5m / 16.5ft waterproof cable to store much more electricity during the day and produce longer and brighter light at night.
●High quality lighting: With 106 LED solar lamps with a detection and lighting angle of 120 °, covers a lot more lighting area, offers super bright illuminance for a wide area. This creates a bright and safe environment for passers-by, even at night.
●Motion sensor and light sensor: The detection system is a combination of light sensor and motion sensor, the updated PIR motion sensor detects people at a distance of 3-5m. when motion is detected, solar lamps will turn on automatically, no motion is detected, it will turn off automatically.
●Protection class IP65: The sun lamp is made of high-quality ABS and is heat-resistant. With the IP65 professional protection level, the inside of the solar lamp can be waterproof and dustproof while maintaining a very bright brightness even after being exposed outdoors for a long time.
●Easy to install: you can simply mount the solar light on the wall with the screws provided, no wiring required. ideal installation height is 1.8 to 2.5 m.
Description
LEDEE solar outdoor light, take away the darkness in the easiest way.
- When there is light around the solar panel, the battery automatically switches to charging status.
- When there is no light around the solar panel, it will automatically switch to motion detection mode.
- When the detection system detects the movement of nearby objects, It automatically turns the LED light on for about 25 seconds and then off.
product parameters
Product list
106 LED solar light * 1
Solar panels * 1
Screw set * 1
product instructions * 1
- Brightness: 800 lumens
- Color temperature: 6300K
- Battery: 1800mAh
- Cable length: 5M
- Number of LEDs: 106
- Maximum lamp power: ?3W
- Number of buttons: 1
- The light does not light up when charging during the day.
- Please avoid direct artificial light on the solar panel at night; otherwise, the light sensor judges that it is daytime and the light does not light up.
- When installing, please install the drainage groove downward, the drainage groove will automatically drain the excess water in the lamp. (There is a special mark on the manual)
- Mode: people come to turn on the lights, people leave the lights off
- We have combined the instruction manual and the shading card, so that friends who are new to solar lights can easily complete the installation.
- Because the solar light is only turned on at night, the shading card can simulate the night scene and test whether the light can start normally. Please remove the card after testing.
- We are closer to users, so that users can easily get started with our Solar Lights.
|
|
|
|
|---|---|---|
|
This type of automation logic is an energy-saving solution, This better helps to extend battery life. |
The light does not come on during the day as it is being charged. |
Please avoid direct sunlight on solar panels at night; Otherwise the light sensor judges it as day and the light does not turn on. |
- Step 1- Mount the bracket on the wall with the empty slot facing up.
- Step 2- Install the light in the bracket.
- Step 3- Install the light into the base, adjust the angle and then tighten the adjustment screw.
- Step 4- Solar panels are installed like lights.
- Step 5- Connect the power plug.
- Step 6- If it is installed during the day, connect the data cable, press the switch, the light will flash once, which proves that the light has been turned on and charged. At night, the lights turn on automatically.
|
|
|
|---|---|---|
| Solar Motion Sensor Light | Solar Motion Sensor Light | |
| Lighting | Floodlights | Spot Lights |
| Motion Sensing | Yes | Yes |
| Battery | 1800mAh | 2200mAH |
| Waterproof | IP65 | IP65 |
| Length of Cord | 16.5ft | 15.7ft |
| Quantity | 1pcs | 1pcs |
