Notice:
The heating wires of the product are evenly distributed in the blanket, and the heating points are mainly concentrated near the heating wires. Electric heating products need to comply with safety regulations and certification temperature requirements, so our product design is strictly in accordance with these regulations.
When using the product, you need to connect the controller to the blanket first, then connect the controller to the wall socket, and then turn on the power of the controller. When disconnecting the power, you need to turn off the power of the controller first, then disconnect the wall socket, and finally disconnect the controller and the blanket. (Note: If the operation is not performed in sequence, it may cause the electric blanket to trigger the overheating protection mechanism and affect the heating function of the electric blanket)
During the heating process of the product, please pay attention that the product cannot cover the hand control and the interface connection. Otherwise, the controller cannot dissipate heat normally, causing the temperature of the controller or the interface connection to be too high, triggering the overheating protection mechanism of the electric blanket.