Feature
●Designed to charge the turbo system with a low pressure of regulated workshop air to show the presence of leaks within the system.Can also be used on cooling systems pipe.
●Helps locate air leaks in turbo system components by plugging the output side of the turbo and the intake inlet.
●Pressure loss can be located easily by hand or leakage spray.
●4 pairs of stepped adapters to fit most turbo systems on cars and light trucks. Adapters range from 1-3/8(35mm) to 3-1/2(90mm)
●Pressure gauge with shut off valve & regulator to help prevent over pressurisation.
Description
WARNING! Always wear approved eye (or face)and hand protection when pressure leakage testing.
Operation
- Select the correct adapter by first measuring the hose diameter.
- Set regulator of tester to 5psi to check for large leaks with valve, open (operating handle inline with the hose axis). And with the air coupling disconnected.
- Select correct size adapters and place in hoses,then tighten the clamp
- Connect the air coupling to check for leaks at the pre-set (5psi). If a leak is identified audibly, it indicates that the system has a fault resulting in loss of pressure.
- If no leaks are evident, regulate pressure to 10psi.
- If no leaks are evident, regulate pressure to a maximum of 15psi or to the manufacturer’s maximum pressure and retest.
- If the gauge pointer remains stationary for one minute it will indicate that system works good.
- Release the pressure in the system by rotating the ball valve lever to align with hose axis.
- Disconnect the quick coupler, clean and return all items to carry case.
|
|
|
|
|
|---|---|---|---|---|
| B1N99201 | B1N992010 | B1N92112 | B1N98648 | |
| Item | 9-Piece Turbo System Leakage Tester Set | 9-Piece Turbo System Leakage Tester Set(RED) | Universal Coolant System Radiator Leak Tester & Refiller | Universal Coolant System Radiator Refiller |
| Adapter Sizes | 1-3/8(35mm) to 3-1/2(90mm) | 1-3/8(35mm) to 3-1/2(90mm) | ||
| Adapter Type | Stepped | Stepped | ||
| Storage Case | Yes | Yes | Yes | Yes |