Use steps:
1.Connect the both sides of a balance cable respectively to the balance port of the
balance charger and parallel charging board. Such as the picture.
2.Connect the power port of Parallel Charging Board to the output port of balance
charger.
3.Connect batteries to the board. Plug the balance heads firstly, and then connect
them to the batteries outputs.
Set the charging voltage(Charging a single battery is the same) and current. The
method for setting the current is as follows:
I=i1+i2+i3+..._in(n≤6)
I:Total Current.
i:The charge current of every battery.
n:The quantity of batteries
Warning:
If just need charge less than 6 batteries in parallel, please put the Housing on the
T plug or another plug which is being used now. If you do it in this way, it can
avoid accident. When the board is charging the batteries, every T plug has
electricity.
Product Size:139×68×26mm (5.47x2.68x1.02inch)
Color:Black
Weight:180g
Package Include:
1x XT60 Li-PO 2-6s Charging Adaptor Board
1x Cable Note: The color of the item may vary slightly due to photography and your
own computer