Heyiarbeit Forstner Drill Bits Tungsten Carbide Wood Hole Saw 60mm
Technical Parameters
Drilling dia: 60mm / 2.36"
Shank diameter: 10mm / 0.39"
Total length: 90mm / 3.54"
Color: Black
Shank type: Round shank
Material:Cemented carbide;45# steel
Product Feature
*Can be used for wood product perforation,installation of spherical door locks,drawer locks,hard plastic products,etc.Dedicated to wood board opening and mounting hinges.
*When positioning the drill,please wait a moment and then drill slowly.
*If there is any abnormality or chip removal during operation,please stop working immediately and clean the debris before continuing the drilling operation.
*Made from cemented carbide (tungsten carbide) blade and being hardened and tempered. Featured with sharp edge, accurate positioning, high hardness, impact resistance, smooth cutting, high toughness.
*For drilling flat bottom holes with no chippings in any thickness of soft wood. For drilling holes in any direction and making arched openings. For drilling partially overlapped flat bottom holes for easy mortising.
*Forstner Drill Bits for industrial purpose is characterized with high hardness and long life, and resulting in nice finishing on woody pieces after cutting.
Instructions for woodworking hole opener
1. Put the hole opener into the electric drill before use and confirm that it is firmly clamped before it can work.
2. Keep the vertical angle with the workpiece when working. After the hole opener drills through the workpiece, the workpiece should be withdrawn while the hole opener is rotating. Please clean the sawdust in time to avoid opening failures during continuous work.
3. Workers should wear corresponding protective equipment when working to protect them from working safely, and apply rust oil after use to extend the service life.
Package Includes
1 x Hole Opener