Feature
●SI8T/K: 8mm Bore x M8x1.25mm Internal Right-Hand Threads
●Spherical rod end bearing for transferring motion between widely separated points
●Machined carbon steel housing and female shank with right hand threads
●Bronze race and hardened, chrome-plated steel ball for strength and resistance to wear and corrosion
●Self lubricating rod end bearings for maintenance free
[5mmx0.8mm 2]
[8mmx1.25mm 4]
[5mmx0.8mm 4]
[8mmx1.25mm 2]
[8mmx1.25mm 1]
[10mmx1.5mm 2]
[12mmx1.75mm 2]
[10mmx1.5mm 1]
[10mmx1.5mm 4]
[12mmx1.75mm 4]
[6mmx1.0mm 2]
[6mmx1.0mm 1]
[6mmx1.0mm 4]
Description
Description:
-Rod end bearing, is used on the ends of control rods, steering links, tie rods, or anywhere a precision articulating joint is required.
-A ball swivel with an opening through which a bolt or other attaching hardware may pass is pressed into a circular casing with a threaded shaft attached.
-The housing is made of machined low carbon steel that is plated for corrosion resistance.
-Rod end bearings are used on the ends of cylinders or linkages to take up misalignment between two connected parts
Specification:
Bearing No.: SI8T/K
Material: Carbon Steel, Chrome Steel
Thread Type: Female (Internal) Thread, Right Hand
Thread Size: M8x1.25mm
Bore Diameter: 8mm
Through Bore Length: 12mm
Dynamic Load Ratings: 11.6kN
Static Load Ratings: 12.9kN