Feature

●SI6T/K: 6mm Bore x M6x1.0mm Internal Right-Hand Threads
●Spherical rod end bearing for transferring motion between widely separated points, Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on
●Machined carbon steel housing and female shank with right hand threads
●Bronze race and hardened, chrome-plated steel ball for strength and resistance to wear and corrosion
●Self-aligning, large load rating, low noise, anti-corrosion, tough and durable. The bearing steel ball and the copper ring are locked and squeezed so that they will not fall off.

[5mmx0.8mm 2]

[8mmx1.25mm 4]

[5mmx0.8mm 4]

[8mmx1.25mm 2]

[8mmx1.25mm 1]

[10mmx1.5mm 2]

[12mmx1.75mm 2]

[10mmx1.5mm 1]

[10mmx1.5mm 4]

[12mmx1.75mm 4]

[6mmx1.0mm 2]

[6mmx1.0mm 1]

[6mmx1.0mm 4]

Description

Description:
-Rod end bearing, is used on the ends of control rods, steering links, tie rods, or anywhere a precision articulating joint is required.
-A ball swivel with an opening through which a bolt or other attaching hardware may pass is pressed into a circular casing with a threaded shaft attached.
-The housing is made of machined low carbon steel that is plated for corrosion resistance.
-Rod end bearings are used on the ends of cylinders or linkages to take up misalignment between two connected parts

Specification:
Bearing No.: SI6T/K
Material: Carbon Steel, Chrome Steel
Thread Type: Female (Internal) Thread, Right Hand
Thread Size: M6x1.0mm
Bore Diameter: 6mm
Through Bore Length: 9mm
Dynamic Load Ratings: 7.2kN
Static Load Ratings: 7.65kN
Package Content: 2Pack