Description:The two ends of the rolling shaft are threaded and fixed firmly, and are hung on the bracket to make it level. Then, use the hand to roll the swinging shaft to make the rolling up. The hanging wire is wound around the two ends of the shaft at the same time. When the rolling is raised to near the apex, let go, so that the rolling will be rotated under the action of gravity, and the turning will be repeated. The sooner. When the roll is lowered to the lowest point, that is, when it is no longer falling, due to inertia, it continues to rotate, and it starts to rise around the suspension line, and rises to the same level as the previous height (slightly lower than the previous height) to stop rising. It drops again under the action of gravity. This rises and falls repeatedly, and finally stops completely.
Weight: 1.8kg (including base)
Specification: 205×128x490mm
Note:
Please feel free to E-MAIL us if there are any problems and questions, we will try our best to MEET YOUR SATISFACTIONS WITHIN 24 HOURS.