5 minutes with GrooVex What is robbing your spin? Encrusted material in the groove cavity and dull/worn groove edges. By simply dragging GrooVex through each groove with moderate pressure you maximize the conforming groove volume and resharpen the groove edges to a hyper sharp .010" radius. In the picture you can see the dark material that was filling the groove before resharpening and the fine metal shavings from the old worn groove edges.
|
Fresh new conforming grooves Do your grooves look like this? They can after using GrooVex! You will notice the difference immediately, not only in appearance but in performance!
|
Backspin Before GrooVex We removed all surface dirt with a wire scrub brush prior to testing this used TaylorMade HiToe 60 degree wedge. Notice the ball speed, carry yardage, and backspin numbers. Note: Individual results may vary. We used a ProV1x ball and measured the results of a 2.0 hcp golfer on a Foresight GC launch monitor.
|
Backspin After GrooVex Ball speed and carry yardage remained almost identical, but look at the backspin! +1355 RPM increase. Note: RPM increases will depend on the state of the original worn grooves. In this case, the club had significant groove wear.
|