[Large]
If your childs ride-on toy needs the shelter of a good winter raincoat, our Heavy Duty Weatherproof Cover for Ride-On Toys is a superior product to help keep it clean and dry. These tough and sturdy covers are made of strong 600D polyester with a robust PVC rubber backing, and the term "heavy duty" means just that. Stout and durable, yet the cover is still easy to get on and off. The cover is very superior to the lightweight blue tarps that always so get ripped and blown away in the wind. Note: If you use these covers while hauling your ride-on toy in the back bed of an open truck, then you will need to lash it down securely. A couple of bungee cords may do the trick, but tie-down straps are even better. The bottom edge has a series of 1" webbing belt loops for this. What you do not want is for the cover to go flapping and flopping around in the wind as this will cause a lot of unnecessary wear & tear on the fabric. Medium: 55"L x 18"W x 33"H Large: 55"L x 28"W x 33"H For best fit around the base of the product, add the length and width of the toy and compare to the length of the cover. The dimension of the cover should be at least 6-12 inches greater than the added dimensions of the toy. For example, a toy 40" long and 26" wide would have an overall dimension of 66", requiring a medium-size cover; a toy 45" long and 31" wide would have an overall dimension of 76", requiring a large-size cover. Specifications Medium Length: 55" Width: 18" Height: 33" Composition:Treated 600D polyester with PVC backing Loops: 1" webbing belt Large Length: 55" Width: 28" Height: 33" Composition: Treated 600D polyester with PVC backing Loops: 1" webbing belt