6-Pin to Cut-End Extension Connector

Philips Hue only allows for a single continuous lightstrip run. Litcessory products allow for several!

This 6-pin to cut-end extension connector, specifically designed for the Philips Hue Lightstrip system, enables you to connect a cut lightstrip to an uncut Philips Hue Lightstrip Extension or any other Litcessory product (extension cable, splitter, etc.). No more wasting costly lightstrip pieces! You can also use this connector to create corners for your lightstrip run, allowing for more design flexibility than ever before! Our cables are flexible and flat, which makes them inconspicuous - perfect for designing your ideal lighting setup!

NOTE: If you want to connect this product directly to the Philips Lightstrip Plus Controller, you MUST use the Litcessory Controller to 6-Pin adapter to do so.

This product is great for

• Reusing the end of a cut lightstrip
• Inserting a corner into a lightstrip run

MADE FOR INDOOR DRY LOCATIONS ONLY

Top Uses of a Litcessory 6-Pin to Cut-End Extension Connector

Frequently Asked Questions:

Will Litcessory products cause my lightstrip to be dimmer?

• No, Litcessory products do not affect the brightness of the lights, as long as your total lightstrip run length (lightstrips plus any Litcessory product length) stays within 10 meters/33 feet, your lights will be just as bright!

What is reverse polarity, and how do I fix it?

• Reverse polarity happens when you plug in the wrong side of a 6-pin connector. The flow of electricity gets reversed, and the lightstrip won’t turn on. This is a common occurrence when setting up your project and it is easily fixed.

I used a cut-end connector and now my lightstrip colors don’t match. How do I fix this?

If your lights are not the right colors after connecting a cut-end connector, this means that the cut-end connector is not making a solid connection with the connection points on the lightstrips. Try the following:

1. Unplug the power source
2. Ensure the backside of the connection points (the side opposite of the LED lights) are making contact with the cut-end connector’s metal prongs, and that it is fully inserted.
3. Close the lid of the cut-end connector and clamp down with a pair of pliers. Use plenty of pressure. You should hear a slight “snap”.
4. To ensure your cut-end connector stays tight, you can wrap the cut-end connector tightly with electrical tape.

If you are still having issues after trying the above steps, please contact our awesome support team. We are always happy to help!

I have a cut Lightstrip. How do I connect another Lightstrip to it?

• To connect to a cut Lightstrip, you will need a Litcessory Cut-End Connector. We have several options to choose from. Our Cut-End to Cut-End Connectors or our Cut-End to Cut-End Extensions allow you to connect two cut lightstrips with cut ends together. Our Cut-End to 6-Pin Extensions allow you to connect a cut lightstrip to an uncut Lightstrip.

I have a cut lightstrip and I need to add a Litcessory extension cable. How do I connect this? To connect two cut lightstrips together with a Litcessory Extension Cable you will need our Cut-End to 6-Pin Connector. 1. Connect to Cut-End to 6-Pin Connector to each cut lighstrip. 2. Plug the extension cable into the 6-pin side of the Cut-End to 6-pin connector

Can I split cut ends? Yes, you can do that by using first converting your cut-end into a 6-pin end by using our Cut-End to 6-Pin Extension or our Cut-End to 6-Pin Adapter and adding our extension cable to it.