This bezel burnishing tool punch set or bezel setting punch set from ToolTreaux features 16 assorted concave, hardened steel punches and one polished hardwood chuck handle, all kept in a tidy wood storage box with metal closure to keep the punches tidy and organized. The tool set is intended for round bezel stone or other settings to ensure a precise, uniform and secure wall. The set can also be used for tube settings, as well as prong closures.

The set includes assorted punches with the following diameters, measured in millimeters: 2mm 2.75mm 3.75mm 4.5mm 5mm 5.25mm 5.5mm 6mm 6.5mm 7mm 7.5mm 8mm 8.5mm 9mm

If you’re wondering how this bezel burnishing tool set works, read on. Choose the appropriate sized steel punch, one that is approximately a millimeter bigger than the outside diameter of the bezel you’re closing, and attach to the hardwood chuck handle; once attached and secure, place the punch over the setting and gently rotate, applying as little or as much pressure as needed, depending on the material you’re working with (e.g. some crystals may be very soft and require much less pressure than in comparison to working with harder materials like diamonds or topaz). If you need some additional force, the hardwood handle can also be used in conjunction with a rubber or plastic mallet.

Lastly, as mentioned above, the bezel setting punch kit tool set comes with a handy wood box for organized storage of all the assorted steel punches; the box features built in spots for each punch with etched sizing for each, as well as a spot for the hardwood chuck handle in the center. The wood box closes with a metal clasp to keep punches tidy and secure when not in use.