Feature
●ELIMINATE GUESSWORK: Punch accurate washers and gaskets with the ABN | 13 in 1 Hole Punch Kit Hollow Leather Punch Set; This hollow hole punch set is a gasket hole punch set that makes clean and precise holes from 3/16-inch to 1-3/8-inch (5-35mm) in diameter to create round gaskets and washers in leather, copper, plastic, rubber, paper, cork, and any material that is hard to cut with a regular scissor or knife (accepted thickness depends on material; typically around 1/16-inch to 3/8-inch)
●EASY TO USE: Select one of the interchangeable hole punch heads and thread it onto the tip of the hollow punch tool; Hold the comfortable grip tool handle with one hand while using a hammer (not included) on the top bolt to drive the tool into your selected material; The pin point is spring-loaded and retracts into handle when punching a hole; Pin point is removable to cut disks with no middle hole ? Unscrew top bolt, remove rubber grip, and release Allen socket screw to remove the center pin
●BUILT TO LAST: Hole punches constructed from drop-forged heat-treated steel for maximum strength and longevity while the 4.25-inch x 2.75-inch (10.8cm x 7cm) leather hole punch tool handle is constructed with a rubber sleeve for a comfortable grip with less user fatigue and more productivity
●EASY STORAGE: Heavy-duty 10” x 1.8” x 7.5” inch (25.4cm x 4.6cm x 19.1cm) blow-molded plastic carrying case with built-in latches and handle for easy transportation, safe storage, and quick organization; Each compartment is labeled by both SAE and metric sizes for quick identification
●PACKAGE CONTENTS: Leather hole punch set package includes (1) storage case, (1) pin point punch shaft, and (13) hole punch head sizes ? 3/16" (5mm), 1/4" (6mm), 5/16" (8mm), 3/8" (10mm), 7/16" (11mm), 1/2" (13mm), 5/8" (16mm), 3/4" (19mm), 7/8” (22mm), 1” (25mm), 1?1/8” (28mm), 1?1/4” (32mm), 1?3/8” (35mm)
Description
ABN | Hollow Punch Set
Take the guesswork out of punching accurate washers and gaskets and use the ABN | Hollow Punch Set for leather, copper, plastic, rubber, paper, cork, and any material that is hard to cut with a regular scissor or knife.
A Closer Look
|
|
|
|
|---|---|---|
EASY TO USEUnscrew the bolt head on the top that you hammer on to cut, slide off the rubber grip, and remove the Allen socket screw to allow the spring-loaded center pin to slide out. |
SPRING-LOADEDThe pin point is spring-loaded and retracts into the handle when punching to create a hole. It is also removable from the shaft so that disks can be cut with no middle hole. |
FOR ANY MATERIALThe inside of the cutter is straight while the outside is tapered. Accepted thickness depends on the material ? Foam can be cut about 3/8-inch thick while stiff, metal, or plastic materials can be cut about 1/16-inch thick. |
Who We Are
Auto Body Now is a family owned company based out of South Dakota. We have an exceptionally strong Internet presence, sending out over 50,000 products each month. In fact, if you have purchased any of your auto body supplies or car care supplies online, there is a good chance we have had the opportunity to serve you.