Specifications:
1. Supply voltage: 9V to 24V
2. Signal input voltage range: 4 ~24V
3. Signal input frequency range: 50Hz~10KHz
4. Signal input duty cycle range: 0~100%
5. Output voltage: 0.00V~5.00V / 0.00V~10.00V
6. Input method: S1 pad on the circuit board: open by default, it has not been used yet.
7. Output method: S2 pad on the circuit board: open circuit (output 0.00V ~5.00V); short circuit (output 0.00V ~10.00V), default is open circuit.
8. Application: remote data acquisition and control equipment:
24V: positive power connector (9V to 24V).
G: Power ground interface.
IN: Signal input positive connector.
G: Signal input negative connector.
OUT: Signal output interface (0.00V to 5.00V / 0.00V to 10.00V).
G: Power ground interface.
Note: When outputting 0.00V to 10.00V, the power supply voltage must be 15V.
Output (0.00V ~5.00V) Resolution: 0.050V / D (V / per duty)
Output (0.00V~10.00V) Resolution: 0.100V / D (V / per duty)
Calculate the measured duty cycle formula: (output voltage (V) / resolution) = duty cycle (%).
Example: Output (0.00V ~5.00V) Output is 2.5V
(2.5 (V) /0.05) = 50 (%).
Package: 1*PWM to voltage module