Specification:
1. Working voltage: 9V to 24V
2. Input resistance: NTC 10K thermal resistance (B value 3435K)
3. Output voltage: 0.00V ~5.00V / 0.00V ~10.00V
4. Temperature measurement range: -40 ~ + 150 (degrees).
5. Output method: S2 pad on the circuit board: open circuit (output 0.00V ~ 5.00V); short circuit (output 0.00V ~ 10.00V), the default is open circuit.
6. Application: remote data acquisition and control equipment;
7. Size: (length) 26mm x (width) 23mm x (height) 10mm
8. Module interface:
24V: Power positive connector (9V ~ 24V).
G: Power ground interface.
IN: Positive terminal of thermal resistance.
G: Thermal resistance negative terminal.
OUT: Signal output interface (0.00V to 5.00V / 0.00V to 10.00V).
G: Power ground interface.
Note: When outputting 0.00V ~ 10.00V, the power supply voltage should be 15V.
Output (0.00V ～ 5.00V) Resolution: 0.0263157V / ℃ (Voltage / Celsius)
Output (0.00V ～ 10.00V) Resolution: 0.0526315V / ℃ (Voltage / Celsius)
Calculate the measured temperature formula: (output voltage (V) / resolution) -40 ° C = measured temperature (° C).
Package: 1*NTC To 0-5V 0-10V Linear Conversion Temperature Module