Feature
●【Reliable Quality】This dent puller kit special in adjustable the width and height with the dent lifter, it is not only for small pits but also for repairing large dent. And use of high-quality metal materials and use the softness rubber of the bottom, so that it will not damage the original paint of the car during use.
●【Professional Glue Stick】Equipped with a professional adhesive viscous glue for dent removal, it does not suddenly detach during use, and a professional glue gun to shorten the sol process time and quick melt the glue and no need to wait for tens of minutes to fully melting.
●【Paint friendly】Never harm your car paint, no toxic chemicals are included. The glue will easy to remove after you spray alcohol on it. Remember to clean the paint before pasting. (Note: aging car paint might fall off by any pressure).
●【Easy to Operate】The paintless dent repair kit is very easy to operate, even the girl can easily repair. Most of the dent remover can be finished in half an hour, besides, the auto body dent puller set can be used unlimited time.
●【Widely Used】Dent pullers are ideal for car dent removal, hail damage dings removal. The tool great to work for the sheet metal processing of truck, automobile, refrigerator, motorcycle body etc.
Description
BlueFire Professional Auto Body Paintless Dent Removal Kit (58pcs)
Package Includes:
- 1 x Bridge Puller + 5 Bridge Tabs
- 1 x Tap Down Pen + 9 Heads Tips
- 1 x Slide Hammer T-Bar Tool
- 1 x Rubber Hammer
- 1 x Dent Lifter
- 1 x Glue Gun
- 5 x Yellow Glue Sticks
- 5 x Black Glue Sticks
- 24 x Puller Tabs
- 1 x Tool Bag
- 1 x Plastic Shovel
- 1 x Dishcloth
- 1 x Bottle
- 1 x Manual
Widely Used
Suitable for any auto dents, repair door dings and hail damage and other dents. Efficient action on automobile, refrigerator, washing machine and other metal surface dents.
How to Repair the Dent?
- Step 1: Clean dent surface. Make sure clean your car surface before application.
- Step 2: Put the glue stick to the glue gun, connect the power source and preheat for 5-10 minutes.
- Step 3: According to the dent size to choose a puller tab, more bigger dent size, more bigger the puller tab.
- Step 4: Apply the preheated glue full with the puller tab, immediately place puller tab in the dent center and press lightly until the glue cures and adheres.
- Step 5: Let the glue cool for about 5-8 minutes. The cooling time should be shorter in winter.
- Step 6: After the glue cooling, use a dent lifter or bridge puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappear.
- Step 7: After repair the dent, spraying alcohol to glue which stick on the car and clean it.
No Harm to The Paint:
- Spray enough alcohol on the glue and tabs.
- Use the shovel to move the tab and glue carefully.
- Keep spray alcohol into the gap between glue and paint when moving forward the shovel.
- Clean the paint with alcohol if there is any small glue residue.
