SPECIFICATIONS:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Replacement Part Number: 3D7-81410-00, 3D7-81410-01
Dimensions :
Interior diameter : 36.9mm/1.45"
Exterior diameter : 97mm/3.82"
Poles Thickness : 21.8mm/0.85"
Poles Width : 12.3mm/0.48"
Other specifications :
Number of wires: 9
Number of pins: 9
Number of plugs: 3
Number of fixation holes: 3(+1)
Number of poles: 18
FITMENT:
for Yamaha WR250R 2007-2017
for Yamaha WR250X 2007-2012/2014/2016-2017
PACKAGE INCLUDED:
1x Generator Stator Coil
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.