Feature

●Roasted Maple Neck and Roasted Mahogany Body：Roasted maple neck provides excellent stability and gorgeous caramel finish. The mahogany wood used for the body was also roasted for stronger mids and slightly lighter weight.
●Hand Polished Stainless Steel Frets：Stainless steel frets provide unrivaled durability and smooth playing surface for nice and easy big bends. Each fret ends are also hand-dressed for playing comfortability.
●U to C Compound Neck Profile and Compound Radius：CP1 has a unique U to C compound neck profile with a thicker shoulder on the lower frets, slowly tapers down to a slimmer C to higher frets. Along with a 9.5” to 14” compound fingerboard radius,CP1 provides excellent playability for both chording and soloing.
●Special Wiring：Pull out the master tone knob to engage the bridge pickup bypass circuit for a hotter trebley tone. This unique wiring enables 7 different tones for more versatility.
●Humbucker-Single Coil-Single Coil (HSS) Pickup Configuration：The HSS configuration is a tried-and-true combo for a large variety of tones and versatility. The bridge humbucker is perfect for higher gain tones while the neck and middle single coils provide clear note definition under overdrive.

[green-CA]

[pink-CA]

[sunburst]

[blue-CA]

Description

Bone Nut：Bone is a harder natural material and it has been favored by many luthiers for higher-end instruments due to its sustain and natural lubricating property. Body Material ：2 Piece Roasted Mahogany
Neck Material ：Roasted Canadian Maple
Fingerboard Material ：Indian Rosewood
Nut：Bone
Frets：22 Medium Jumbo Stainless Steel
Neck Profile ：Compound U to C shape
Pickups ：2 Single Coils, 1 Covered Humbucker
Controls ：Master Volume, Master Tone, 5 Way Blade Switch
Strings ：010-046
Bridge： 6-Point Synchronized Tremolo
Tuners ：1:21 Ratio Die Cast
Scale Length：25.5”(648mm)
Nut Width：41.7mm
1st Fret Neck Depth ：20.5mm (±0.5mm)
12th Fret Neck Depth ：21mm (±0.5mm)
Fingerboard Radius: Compound（9.5-14）