[Copper+ABS]
This black glass rinser is widely used in cleaning beer cups, milk cylinders, red wine cups, beverage cups, teacups, baby bottles, drinking glasses, coffee cups in home, bar, office, restaurant, and hotel.
The kitchen is the heart of our home and where we spend a significant amount of time.
At KITRESQ we aim to turn that time into an ultimate smooth wonderful experience at an affordable and convenient fee.
We want to meet our objectives by producing kitchen utensils that meet strict standards, focusing on product innovation and offering the best fees to our customers.
Satisfaction to pressing the item down on the cup washer and feeling the blast of water. Definitely going to be on the list of things that changed routine! Great value glass rinser at a fraction of the cost of competing models.
|
|
|
|
---|---|---|---|
High-Pressure RinserThe glass rinser adopts a full 304 stainless steel valve, ensuring water safety. It comes with 5 powerful water spraying holes, providing multi-dimension cleaning and maximum cleanness. |
Extended designWe have upgraded the mounting shank part of the cup washer, from 1.5 inches to 2.7 inches, suitable for most families. |
High quality metal materialThe pressing part of the cup mouth are made of high-quality ABS material, and the main body is made of copper and the surface is electroplated. |
Strong and sturdySolid brass end fittings connection ensure quality durability. Strong 304 stainless steel construction ensures the long time daily usage. |
|
|
|
---|---|---|
Distance OnePlease make sure the distance between Installation Hole and Faucet is at least 3" inches. |
Distance TwoPlease make sure the distance between Installation Hole and Backsplash is at least 2.6" inches. |
Distance ThreePlease make sure the distance between Installation Hole to Sink is less than 2.8" inches. |
|
|
|
---|---|---|
Rinser Body & Fixtures1. Slide the mounting shank through the sink hole from above. 2. Slide the mounting shank through the rubber washer, then through the steel support washer. |
Fastener Tight Fixings & Supply Hose Connection3. Ensure the outlet extends into bprior to fully tightening mounting nut, tightening the fastener. 4. Thread the G1/2" end of provided supply line to mounting shank. Wrench may be used on shank flats to avoid rotation. |
Adapter T Connection5.Connect to COLD or HOT water at your free. Unthread existing faucet supply line from angle stop on the chosen side. 6.Thread provided tee onto angle stop in place of the supply line that was disconnected in the previous step. 7.Thread both the faucet supply line and the 3/8" end of provided supply line to tee.After supply line is installed, check and retighten the mounting nut. |