W/Saver 176" x 1" 3T All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owners manual for further safety instructions. Please refer to your owners/operation manual to make sure the blades length, width and thickness can fit your bandsaw machine. This precision ground, thin kerf resaw blade is designed for reduced waste when cutting expensive hardwoods. During the manufacturing of this blade, The teeth are impregnated with carbide particles, making this a very durable blade which retains its sharpness even resawing the hardest and toughest woods. This blade is especially designed for resawing wood, particularly the hardwoods and other difficult to cut wood species. The narrow kerf conserves these expensive woods, giving you more yield from a block of lumber. It comes with 0.025” Thickness x 0.035” Kerf. The following bandsaw models use 176 inch ( 14 ft. 8 inch, 14 8" ) bandsaw blades. Laguna LT20" x 20"