Lokkr 3D Printer Filament Storage Bag Kit
Double seal design, single side embossing treatment with good sealing.Moisture-proof and dust-proof. Reusable and resealable for frequent filament changes.
BPA-FREE and PE+PA composite material, strong and durable, recyclable, safe and do no harm to environment.
Specifications:
●Size: 30x34cm/11.8inch x 13.4inch
●Material: PE+PA Composite Material
●Compatibility: All 0.5KG/0.75KG/1KG filaments and 1.75mm/2.85mm/3mm filament.
How to Use:
1.Put the Filament& Humidity Indicator Cards&Desiccant in the Bag.
2.Zip Up the Filament Storage Bag with Sealing Clip Completely, We Suggest to Try More Times to Make Sure the Bag is Totally Closed.
3.Keep the Bag Flat and Smooth the Air Valve Position, Aim at the Air Valve to Pump Air, Wait for About 3 Seconds, then You Can Pump Air Continuously.
4.After Pumping Press it with Your Hand to Smooth the Pumping Port.The Sealing Effect Will Be More Obvious.
Note:
Indication Range: 10%- 60%,When humidity levels rise above the indicated RH, the indicating spot will change color from blue to pink. If the humidity levels rises above 30%, It is recommend to change the desiccants or it can be reused after drying with oven or hair dryer.
After the zipper has been clamped once, you can use it again by hand.
You must press the air valve by hand after each air extraction to ensure that there is no air in the air valve.
If the manual pumping is slow, you can squeeze out a part of the air before pumping, and we will launch an electric pumping device soon.
Packing List:
●12 x Vacuum Sealed Bags(30*34cm)
●1 x Hand Pump
●20 x Desiccant
●12 x Humidity Indicator Cards
●4 x Sealing Clip
Why choose us?
24-hour feedback excellent customer service.