Feature(may vary by option.)

●Bi-metal type, M42 grade, 70-1/2" long, 1/2" wide, 0.025" thick, 6/10 TPI
●6-10 TPI is perfect for cutting aluminum, copper and brass etc
●6-10 TPI is variable teeth profile, small teeth with big teeth
●8% cobalt with 2% tungsten content to increase durability abrasive resistance
●Suits all bandsaws which use 70-1/2" long, 1/2" wide bandsaw blade

[6  & 10TPI]




[12  & 16TPI]




[6TPI]





Description

Imachinist New Bandsaw Blade 70-1/2" X 1/2" X 0.025" X 6/10tpi

Blade Length: 70-1/2" or 510-1/2"

Blade Width: 1/2" or 13 mm

Blade Thickness: 0.025" or 0.65 mm

Blade Teeth: 6/10tpi (variable pitch)

Teeth Form: null raker

Include: 1 piece of 70-1/2" x 1/2" x 0.025" x 6/10tpi band saw blade

Suitable: for aluminum, copper, brass etc and other non-ferrous metal

70 1 2 in 70.5 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1790 70 1 2 in 70.5 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1790 70 1 2 in 70.5 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1790 65 1 2 in 65 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1651 70 1 2 in 70.5 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1790 70 1 2 in 70 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1578
Click here for 70-1/2", 6TPI Click here for 70-1/2", 10/14TPI Click here for 70-1/2", 12/16TPI Click here for 70-1/2", 14TPI for stainless Click here for 70-1/2", 14/18TPI Click here for 70-1/2", 24TPI
Blade Length 70.5 Inch 70.5 Inch 70.5 Inch 70.5 Inch 70.5 Inch 70.5 Inch
Blade Width 0.5 Inch 0.5 Inch 0.5 Inch 0.5 Inch 0.5 Inch 0.5 Inch
Blade Thickness 0.025 Inch 0.025 Inch 0.025 Inch 0.025 Inch 0.025 Inch 0.025 Inch
Blade Teeth 6TPI 10/14TPI 12/16TPI 14TPI 14/18TPI 24TPI
Pitch constant pitch variable pitch variable pitch constant pitch variable pitch constant pitch
Suitable for ferrous solid rod with small diameter ferrous thick tubing, profile, sheet, plate etc ferrous thin tubing, sheet, plate, profile etc stainless steel ferrous thin tubing, sheet, plate, profile etc ferrous thin tubing, plate, sheet etc, dont cut non-ferrous metal, like aluminum etc
SKU S7012126 S7012121014 S7012121216 S70121214SS S7012121418 S70121224
64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Cold Rolling

We use imported cold rolling machine to cold roll the band saw blade strip

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Cold Rolling

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Milling

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Heat Treatment

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Welding

Blade Teeth Selection Advice and Welding Joint Comparison

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

How to Improve Life

  • Blade installation is the first step, make sure teeth is shown outside the guide, and blade strip is clamped tightly inside the guide.
  • Teeth direction should be the same with the direction of wheel rotation, twist the blade from inside to outside if teeth direction is opposite.
  • Running-in is required when blade cuts metal for the first time. Its important for blade life. During running-in, cutting speed should be 1/3 of normal speed, feed should be 1/4 of normal feed. Usually, after the blade cuts the first several pieces, like 5-10 pieces, adjust cutting speed and feed gradually to normal speed according relative parameters and your metal.
  • Blade tension will be different for differnt wide blades, as time goes on, blade tension will be reduced by the bandsaw and blade stretch, make sure the blade is correct tension, our recommended blade tension is 300N/mm2.
  • Coolant will be useful to cool and lubricate blade and teeth during cutting, better coolant could avoid overheat on the teeth of the blade, and reduce friction between the blade and the metal you cut.
  • Teeth selection is also important, here are our experience:

  1. big variable teeths (like 3/4TPI, 4/6TPI, 5/8TPI) are for cutting ferrous solid rod with big diameter;
  2. big constant teeth (like 6TPI) is for cutting ferrous solid rod with small diameter;
  3. big variable teeth (like 6/10TPI) is for cutting aluminum, copper, brass etc and other non-ferrous metal;
  4. middle variable teeths (like 8/12TPI, 10/14TPI) are for ferrous thick tubing, profile, sheet, plate etc;
  5. small constant teeth (14TPI) is for general purpose;
  6. small variable teeths (like 12/16TPI, 14/18TPI) is for ferrous thin tubing, sheet, plate, profile etc;
  7. small constant teeth (24TPI) is for ferrous thin tubing, plate, sheet etc, dont cut non-ferrous metal, like aluminum etc.

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

bandsaw blade packagebandsaw blade package

Welding Joint

We weld blades with high performance welding machine to make sure welding joint looks perfect.

Teeth Direction

Default teeth direction is rightward, if you want leftward direction, please twist the blade from inside to outside.

Original Package

Brand new with original package for this blade with tips behind blade pacakge to help customers.

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

64 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 164064 1 2 in 5 feet 4 inch 5inch 5inches inches half steel replacement parts bimetal cut hss 1638 1640

Metalworking Type

Bi-metal blade is designed for metalworking, ideal for metalworking craftman, blacksmith, mechanic etc.

Compatibility

Accurate length with high performance, compatible with most bandsaws with more choices on teeth pitch.

Ideal DIY Tools

Bi-metal type, M42 grade, 8% cobalt with 2% tungsten, much more fatigue resistant and durable on metal.

Blade Life

Spring steel backer strengthens blade life, hardened edges to cut metal straightly with ease, blade works with high performance.