Feature
●New upgrade ---There are two driving gears, which are driven together with the other two auxiliary bearings, which can increase the squeezing force by 2 times. The transmission stability is greatly improved. After upgrading the metal gear, the durability is improved, but the noise generated by the metal characteristic will be greater than that of the plastic gear. Please read the manual and FAQ on OMGEXTRD official website carefully before installation.
●The Upgrade Full Metal Aluminum Alloy Material Extruder --- Is an update for the plastic extruder. Upgrade your Creality 3D Printer Extruder with "Metal Anodised Aluminum". The extruder drive upgrade can resolve the under extrusion problem. This extruder even has smoother feeding than the RED metal extruder. And it has stronger pressure pushing the filament into the printer nozzle to improve the printers performance.
●Please carefully read the specific assembly steps and FAQ in the OMGEXTRD official website before installation.Extrusion Reduction Ratio ---1:3 Motor torque output 3 times 36 42 stepper motors can be used
●If you purchase OMGEXTRD 10M6V2M6, it becomes OMGEXTRD D1 Set.Compatibility--- Full metal extruder feeder drive 1.75 mm filament. It makes loading the filament easier, smoother and more stable, without worrying about the filament being scratched or broken.
●Compatible models:Creality CR-10 Creality CR-10-S Creality CR-10-S5 Creality CR-10-S4 Creality CR-10 MINI Creality CR-20 / Creality CR-20 Pro Ender 2 / Ender 3 / Ender 3 Pro / Ender 5 TronXY X5S TronXY X5S Tevo Tornado Flsun Q5 Flsun QQS-Pro Flsun SR.Please refer to ASSEMBLY on OMGEXTRD official website, and 1, E-step-value, 2, Stepper-current-adjustment.
Description
E-STEP settiings:
NOTE:
F2 has been replaced with a new size large gear, the diameter is 8.4mm, so the E-STEP value needs to be reset to 363.
If using a 42 stepper motor, the step angle is 1.8°, the motor drive is 16 subdivisions, and the gear ratio is 1:3E-STEP:363
If ??using a stepper motor at 36 pitch, the pitch angle is 0.9°, the motor drive is 16 subdivisions, and the gear ratio is 1:3E-STEP: 726
2 spring screws on the bottom, do not over tighten to avoid shreds filament.
All metal construction, by the best durability.
We provide comprehensive replacement services for various accessories. For other after-sales service issues, please refer to the official website of OMGEXTRD.
Notes on bottom screw installation:
NOTE:
* There are 2 spring-loaded screws on the bottom, be sure not to over-tighten so as not to over squeeze and chew the filament. Before installing it on the hot end.
* please do a test of the clamping force by pulling the filament by hand.
* Instructions for use are available in the ASSEMBLY link on the OMGEXTRD website.
Dimensions of the grey extruder:50mm*48mm*20mm
FLSUN Super Racer installation and setup
OMGEXTRD F1 extruder upgrade FLSUN super racer sr installation and setup steps.
E-step value:365.
There is an installation video on the OMGEXTRD official website.
The installation method and setting steps of FLSUN can be viewed on our U2B video website of OMGEXTRD.
Four-wheel drive, double extrusion force
|
|
|
|
|---|---|---|
CompatibilityCompatibility---Full metal extruder feeder drive 1.75 mm filament. It makes loading the filament easier, smoother and more stable, without worrying about the filament being scratched or broken. |
All aluminumAll aluminum alloy shell, 2 steel driving gears, and 2 steel bearings, stable, uniform, easy and perfect transmission effect. Suitable filament diameter 1.75mm,The diameter of the extrusion wheel:8mm. |
High-quality1. The Upgraded All Metal Extruder Feeder Drive 1.75mm Filament can make loading the filament easier and smoother 2. Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothly. 3. Made of aluminum alloy, full metal. |
The CR-10S Pro V2 is working like a charm after the extruder upgrade(OMGEXTRD A2), zero stringing, just perfect.
OMGEXTRD A2 extruder upgrade.
|
|
|
|
|
|
|---|---|---|---|---|---|
| OMGEXTRD F1 | OMGEXTRD F2 | OMGEXTRD D1 | OMGEXTRD DM1 | OMGEXTRD A2 | |
| Motor | ? | ||||
| Direct extrusion | ? | ? | ? | ||
| Far distance | ? | ? | ? | ? | ? |
| Install splint | ? | ? | |||
| Hotend Kit | ? | ||||
| V2-M6 Screw | ? | ? | |||
| E3D-H2 connecting bracket | ? |