Feature
●??【100% Silicone Material】Our baby edge protector strips are made of 100% silicone, which helps babies and seniors avoid being hurt by sharp walls and tables. BPA free, providing more softness and health for your child.
●??【Pre-adhesive Strips】Our baby bumper strips come pre-assembled and are very easy to install. All you need to do is clean the area to be installed, peel off the sticker, press it and let it stay on for 24 hours. To make it be peeled off easily, please use a hairdryer to heat it before you remove it.
●??【Safe and Soft】This product should be used under adult supervision. We use very soft and thick silicone material, non-toxic and harmless, not easily deformed, safe and shockproof. Reduce the injury caused by the baby collision, for the safety of the baby escort.
●??【High Adhesion】Our bumper bars are 1.67cm wide and 3m long. Our baby proofing edge can be well pasted on a variety of materials, we use a high-strength adhesive that covers the entire interior to prevent the protective strip from tearing off due to childrens curiosity.
●??【Sincere Service】We are fully committed to customer service, if you receive any problems with the product you can write to us at any time, you can unconditionally send back and free replacement.
[3m & 9.84ft]
Description
100% Silicone Edge Protector Strip, Pre-Tape Adhesive Corner Protectors for Kids for Furniture
Specifications:
Type of material: 100% silicone
Length: 1 meters/6.6ft
Width: 1.67 cm
Thickness: 3 mm
Installation Instruction:
1. Clean the specific locations of your furniture corners.
2. Peer off the adhesive stickers.
3. Stick it on a clean surface
4. Press and let sit for 24 hours, do not try to lift
Suitable for various materials:
The corner covers baby safety is suitable for clean and smooth surfaces. It is not suitable for plaster surfaces, paper surfaces, diatomaceous earth, untreated wood, sink tops, and other uneven surfaces.
Attention:
1. Please mark in advance, repeated pasting will affect the adhesive.
2. Please clean the stain before installation.
3. It is recommended not to touch after installation, and the adhesive is better after 24 hours.
4. If for some reason, there is glue residue when you remove it, If you want to remove it, do not tear it off directly. Please use a hairdryer or heat gun to soften the tape first (not too hot) and then tear it off slowly to prevent tearing the tabletop or wall. The surface of ordinary furniture can be used with confidence. When removing it, use a hair dryer to heat it and slowly tear it off. But if your furniture is paper-thin or prone to paint peeling, it is not recommended to install it on this furniture because the adhesive is very sticky and may damage the furniture.