Feature

●Compact plastic case，suitable for use under poor working conditions. Test at any angle, even upside down.
●Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL
●Large screen (segment LCD), showing all functions and parameters. With EL background light.
●Large capacity memory could store 100 groups information.
●Software to connect with PC via USB port.Software calibration function.


Description

Tips:
1. this instrument is equipped with D-type sensor, which needs to measure the hardness of metal more than 5mm. D-type probe is a conventional probe, which is suitable for measuring most workpieces. Workpieces of special materials need to be equipped with other types of probes.
2.The 3 needle thread of the sensor has two colors of yellow and gray. Two colors of the line with random sensors, random delivery.

Technical Specifications:
Measuring range：(170-960)HLD,(17-68.5)HRC,(19-651)HB,(80-976)HV,(30-100)HS,(59-85)HRA,(13-100)HRB
Measuring direction：360°
Hardness Scale：HL、HB、HRB、HRC、HRA、HV、HS
Display：segment LCD
Data memory：max. 100 groups（relative to impact times 32～1）
Working voltage：2AA battery (not included)
Continuous working period：about 100 hours（With backlight off）
Communication interface：USB
Packing list:
Standard Configuration :
1.Main unit----1,
2.D type impact device---1 With cable,
3.Standard test block---1,
4.Cleaning brush (I)---1,
5.Small support ring---1,
6.Manual---1,
7.Instrument package case---1