Feature:
1. HIGHER MEASUREMENT FREQUENCY 3GHz vector network analyzer is a vector network analyzer with higher measurement frequency developed and produced according to LGPL license agreement and based on the design of for OwOComm.
2. NEW UPGRADED VERSION With a different technical architecture, vector network analyzer does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change.
3. BASIC SPECIFICATIONS Vector network analyzer with a frequency range of 50 kHz to 3 GHz, system dynamic range (calibrated) of 70 dB (up to 1.5 GHz) and 60 dB (up to 3 GHz), and S11 noise floor (calibrated) of ?50 dB (up to 1.5 GHz) and ?40 dB (up to 3 GHz).
4. WITH USB INTERFACE The vector network analyzer has a built?in 1950mAh lithium?ion battery with a micro USB interface for charging via USB with a maximum charge current of 1A.
5. LARGE DISPLAY The antenna analyzer comes with a 2.8inch display with a resolution of 320 x 240 for a clear display and a maximum scan point of 201 on the device screen and 1024 for USB.
Specification:
Item Type: Vector Network Analyzer
Material: ABS
Frequency range: 50kHz-3GHz
System Dynamic Range (Calibrated): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
S11 Noise Floor (Calibrated): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
Scanning Speed: 100 points/second
Display: 2.8 inches, 320 x 240
USB Interface: Micro USB
Power Supply: USB, maximum charging current 1A
Battery: 1950mAh lithium-ion battery (built-in battery)
Battery Connector: JST-XH 2.54mm
Maximum Scan Points (on device screen): 201
Maxi