Specification:
Item Type: Spectrum Analyzer
This is a small spectrum analyzer, primarily intended for 0.1MHz to 350MHz input but it has some nice other capabilities:
1.Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz.
2.Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz
3.Color display showing 290 scan points covering up to the full low or high frequency range.
4.Input Step attenuator from 0dB to 31dB for the MF/HF/VHF input.
5.When not used as Spectrum Analyzer it can be used as Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square waving output between 240MHz-960MHz.
6.A built-in calibration generator that is used for automatic self test and low input calibration.
7.Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer
8.Rechargeable battery allowing a minimum of at least 2 hours portable use
9.Due to the low cost and very small form factor there are certain relevant limitations.
Resistive touch control
1.Jog switch control
2.USB serial port control
3.Optional TTL USART port (SW not yet implemented) on the internal PCB
4.Linear power supply to avoid switching noise.
The input/output specification is split over the 4 modes
Package List:
1 x Analyzer
2 x Connection Line
1 x Connector
1 x Lanyard
1 x Antenna
1 x USB Cable