Surface Mounted Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, heavy-duty cast aluminum 7/64" (2.8mm) thick, and shall have all exposed surfaces finished with acid, chip and scratch resistant epoxy enamel. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self- adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have C UL US approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Electrical Specifications: Motor: ¼ HP, 7500 rpm, Brush type, dual ball bearings. Voltage: 115 - 240 VAC, 50/60 Hz. 1.6 kW. Air Output: 180 CFM max (306 m3 /h) - Temp: 140° F (60°) @ 77° F (25°)ambient room temp. Heater: 1488 Watts. Current: 14.4 Amps @ 115 VAC; 15 Amps @ 240 VAC. Sound Pressure (Decibel Level) Max: 64 dB-A @ 2M.