How to Use:
Antenna, cable, satellite finder, set top box, TV connection operation
1. Connect the "Satellite" on one side of the satellite finder to the antenna tuner, and connect the other side of the port marked "Receiver" to the receiver, and turn on the receiver and the TV.
2. After the receiver is turned on, the voltage supplied by the receiver is 13?18V. Check that the satellite finder screen is on. If the light is on, it means the satellite finder is working normally.
3. Set the data of the satellite to be received in the receiver (including local oscillator frequency, downlink frequency, symbol rate, polarization, etc) and turn on the signal strength and signal quality cursor status.
Specification:
Item Type: Digital Satellite Finder
Material: ABS
Model: SF-95DR
Frequency Range: 950-2150 MHz
Input Level Range: -40~-10dBm
Impedance: 75Ω
Working Range (LNB Gain): 52-60dB
Input Voltage: DC 13-18V
Working Temperature: 0~40℃
Package List:
1 x Digital Satellite Finder
1 x Manual