Feature

●This kit includes a 20" adapter ring, a 20"x6" riser, 20" riser cover, 20" safety screen, an adapter ring installation kit, and stainless steel screws
●Additional 20" Polylok risers can be purchased and stacked on to this kit
●This package gives you approximately 8" in height
●Optional foam gasket sold separately


Description

Polylok Complete 20" Riser Kit (8" Tall)

kitkit

The Polylok 20" riser kit comes complete with everything needed to install a septic tank riser system in your application. This package gives you approximately 8" in height. Additional 20" Polylok risers can be purchased and stacked on to this kit.

The Polylok Complete 20" Riser Kit consists of the following components:

riserriser

covercover

adapteradapter

install kitinstall kit

Polylok 20" x 6" Riser

(PN: 3009-NG)

Polylok 20" Riser Cover

(PN: 3009-RC)

Polylok 20"/24" Riser Adapter Ring

(PN: 3009-AR)

Polylok Adapter Ring Installation Anchor Kit

(PN: 3009-KIT-NG)

Optional foam gasket sold separately

ssss

Polylok 8" Tall & 14" Tall Riser Kits now include Polylok Riser Safety Screens!

These bright yellow, heavy-duty ABS screens act as a secondary layer of protection if the riser cover is unknowingly damaged or removed. The Riser Safety Screen fits in the upper most riser stack of our Polylok 12"x6", 20"x6", 20"x12" and 24"x6" risers and prevents entry into the tank. The Riser Safety Screen is rated at 250 lbs. per sq. ft. and comes with a built in handle. For a better nights sleep, make this a part of your riser installation each and every time!

Polylok riser kit installationPolylok riser kit installation

Installation Instructions:

  1. Locate adapter ring over access opening on top of tank
  2. Using a 1/4" masonry bit, drill 8 holes 1-1/4" deep on top of tank
  3. Clean under surface of adapter ring (apply optional foam gasket or butyl)
  4. Position adapter ring over opening, using 1/4" anchors, tap anchors into drilled holes and tighten with wrench
  5. Position appropriate riser and or cover and screw onto the adapter ring to provide a watertight connection

  • NOTE: These items should be installed by a professional septic tank installer or pumper. These are not intended to be installed by a homeowner.