Feature

●MEASURE!.. your ID & OD Dimensions - Use with -08 1/2" ~.50" ID (inner Diameter) & ~ .81" OD (Outer Diameter) 2SN type hose as mentioned below.
●IMPORTANT! Use with R2, R16, R17, 2SN 2-wire type Steel Braided Hydraulic Hose ONLY (check hose labels/markings): Not for Hoses with a steel mesh cover. “non-marking” power washer hose, water irrigation tubing, plastic tube of any kind including RV/Mobile home water lines, R5 cloth covered air brake hoses, or Super High-Pressure Skive Hose. If no marking see below.
●NOTE: If you are unsure if your hose is of correct material (2SN group type) as mentioned above, DO NOT purchase or attempt repair. Common uses are for Implement hoses, construction equipment, logging, tow trucks as an emergency repair until a replacement hose can be installed.
●High Quality Zinc Plated Reusable Hose fittings and be reused for the next time a repair is needed.
●Fast and Free 2-3 Day Expedited Shipping


Description

Usage Guidelines: The ferrules (collars) are reverse threaded. Screw these nearly all the way on so the hose end comes up to all but approx 1/8" (about 1/2 turn) from the top of the ferrule. Lubricate male threaded stem and internal hose opening inside ferrule hole with hydraulic oil Began threading stem into ferrule. The goal is to have the ferrule (collar) make as much contact with the hose yet still be able to get the stem started.