Feature●(1) Used to heat composite resin material to improve its flowing effect; can also be used to heat manual instrument(s) for bonding.●(2) With precise circuit to control the heating module, temperature tolerance is controlled within 1 Degree Celsius.●(3) 3-gear temperature: 40, 50, 70 Degrees Celsius●(4) Fine workmanship and good performance.●(5) Easy to use.Description
Operation:
- After plug the power supply,the digital tube is always on ” -- ℃ ”
- After plug the power supply,single press “ ON/OFF/SET ”Heater goes into the heating state according to the set temperature at previous power-off.It automatically stops heating after reaching preset temperature.
- After plug the power supply,single press “ + ” or “ - ” into the setup mode.Press “ + ” can increase the preset temperature.Press “ - ” can decrease the preset temperature.
- After setting,single press “ ON/OFF/SET ” into the heating state.It automatically stops heating after reaching preset temperature.
Technical parameter:
Power adapter:
Input:AC100-240V 50/60Hz
Output:DC15V2A
Heating temperature range:40℃-70℃,±1℃