Feature

●(1) Used to heat composite resin material to improve its flowing effect; can also be used to heat manual instrument(s) for bonding.
●(2) With precise circuit to control the heating module, temperature tolerance is controlled within 1 Degree Celsius.
●(3) 3-gear temperature: 40, 50, 70 Degrees Celsius
●(4) Fine workmanship and good performance.
●(5) Easy to use.


Description

Operation:

• After plug the power supply,the digital tube is always on ” -- ℃ ”
• After plug the power supply,single press “ ON/OFF/SET ”Heater goes into the heating state according to the set temperature at previous power-off.It automatically stops heating after reaching preset temperature.
• After plug the power supply,single press “ + ” or “ - ” into the setup mode.Press “ + ” can increase the preset temperature.Press “ - ” can decrease the preset temperature.
• After setting,single press “ ON/OFF/SET ” into the heating state.It automatically stops heating after reaching preset temperature.

Technical parameter:

Power adapter：

Input：AC100-240V 50/60Hz

Output：DC15V2A

Heating temperature range:40℃-70℃，±1℃