Feature

●High Efficiency: The mini heat gun can boost up to 350w power which can provide 662℉(350℃) hot air flow 300L/min within seconds, it is much powerful than others that will make your work more efficient.
●High quality: Built in over-heat protection allow the heat gun cut of the current automatically when it get overheated which can preventing the body melt and protect users from hurts. PA6+GF30 body shell and nozzle shield can also give your more security.
●Wide Applications: Wide use in daily life and perfect for DIY projects. You can use the mini heat gun for crafts, DIY, electronics repairing, wrapping, soldering, paint removing and watercolor drying.It is a great tool for you to make your own handmade work.
●High Performance: This ergonomic designed heat gun can reduce fatigue during use.The built-in bracket allows stand stably for a hands-free operation, 75 inches long cable helps you do crafting in large area more conveniently.
●Warm Tips: There may be slight smoke from the nozzle of heat gun when the first-time use. This is because some moisture on the hot wire or mica paper. The smoke will dissipate in 5 to 8 minutes. This is a normal appearance, please don’t worry and use it with confidence.

Description

ENGINDOT 350W Mini Heat Gun--Very suitable for family, daily life and DIY projects

NOTE:

There may be slight smoke from the nozzle of heat gun when the first-time use. This is because some moisture on the hot wire or mica paper. The smoke produced is non-toxic and harmless.The smoke will dissipate in 5 to 8 minutes. This is a normal appearance, please don’t worry and use it with confidence.


Shrinking wrapping Wrap the object with heat-shrinkable plastic fim.Begin to heat the film from a safe distance while keeping the hot tool moving.Move the hot tool closer to the film until the film starts to shrink and becomes taut.	Embossing When activating embossing powder,remove excess powder by dusting the powder off with a clean,dry paint brush.Move the nozzle end around in a circular fashion until the embossing powder is raised and shiny.	Drying paint Use this mini heat gun to concentrate the heat , can reach a temperature of 662°F (350°C) and an air volume of 300L/min in a few seconds, heats up quickly to help speed up paint drying.


Removing stickers The hot air gun is suitable for detailed work such as removing stickers. Heat the stickers and gently peel them off with a plastic caliper, which can perfectly solve the problem of stickers.	Remove paint Hold the heat gun near the wood surface, move the heat gun slowly across the surface, and scrape off the paint with a wide paint scraper as soon as the paint starts to blister and wrinkle.	Shrinking insulation tubes The reflector nozzle of the heat gun distributes the heat flow evenly around the entire work surface. Can securely shrink tubes around damaged wires and cables.

Warm Tips:

The nozzle temperature can reach 662°F in a few seconds, please do not touch the nozzle until the tool cools down.
Do not use near combustible materials such as dry grass,leaves and paper which can scorch and catch fire.
Do not touch the nozzle until the tool has cooled.
Do not use the heat gun as a hair dryer.
Tools and paint scrapings become very hot.To avoid burns,use work gloves when scraping.
Always treat the hot air units with the same respect as an open flame.

ENGINDOT 350W Mini Heat Gun--Very suitable for family, daily life and DIY projects

Shrinking wrapping

Embossing

Drying paint

Removing stickers

Remove paint

Shrinking insulation tubes

Product information