Specification
Item Type: Gas torch
Product Material: Iron brass plating
Product Model: Double-open YD-35
Package List
1 x Gas Torch
1 x Nozzle
1 x Air Pipe
1 x Accessory Bag
Instructions:
1. Connect all the parts of the sprayer, tighten the gas pipe chuck, connect the liquefied gas bottle connector, turn off the sprayer switch, loosen the liquefied gas bottle valve, check each part for leaks.
2. Ignition: Loosen the sprayer switch a little and ignite directly at the nozzle. Adjust the sprayer switch to get the desired temperature.
3. Shutdown: First close the valve of the liquefied gas cylinder. After the flameout, turn off the switch, and no residual gas should be left in the pipe. Hanging the sprayer and the gas pipe and put them in a dry place.
Note
1. This product is strictly prohibited from oiling.
2. When using, leave the liquefied gas cylinder more than 1.5 meters.
3. It is found that the gas pipe has scald, aging and wear and should be replaced in time.