Feature

●【High quality】: Mecurate rafter square made of die-casting aluminum, which is light and convenient. Good oxidation resistance, not easy to break, each triangle ruler is thickened, corrosion-resistant and high hardness.
●【Permanent scale】: With permanent laser engraved scales, Mecurate rafter square gives you the over standard accuracy you need. Frosted smooth surface, wear resistance, clear scale on the ruler surface, long service life.
●【Multi-function】: Suitable for the measurement, Mecurate rafter square can be used as a protractor, woodworking compass, triangle square and frame square. The horizontal base is convenient for marking, smooth and practical.
●【Convenient and comfortable design】: Mecurate rafter square is convenient to hang and store when not in use with humanized design. The edges and corners of each triangle are polished by special craftsmanship, so that it is smooth and does not hurt your hands.
●【Warranty】: Mecurate products are providing 12 months warranty and life time support, be free to have new item for replacement.

Description

Rafter square is an essential tool for carpenter, whether you are working on rafter layout or just need a quick 45° or 90° angle measurement, this rafter square is committed to delivering the most refined, accurate, and easy-to-use layout square. Our instruction rafter squares deliver on our commitment and legacy of providing quality measurement solutions while our other rafter squares deliver a full line of solutions to meet any measuring needs.

Application


The diamond cut out used to square a line that is drawn across the board to allow you to then make a 90-degree line perfectly from your line to the edge of the board. If you need to find the level of a surface but, for some reason, you do not have a bubble level, you can improvise with the speed square and a plumb-bob.	Set the pivot at the edge of the board and then rotate the square around that point until the edge of the board aligns with the correct mark on the "Common" scale - marked in red in the picture. Then draw a line along the ruled side of the square.	Place the lip side against the board and pressed against it at the pivot point (labelled PIVOT on the square).The other end is rotated away from the edge of the board until the edge and the desired angle are congruent. Now the saw cut can be marked. Note that you will always cut along the complementary angle. If the angle at the edge is 30° then the angle you will mark will be 60°.	Parallel to the degrees scale a further groove is milled with two scales for mitre (compound) cuts. The upper one is for hip rafters (labelled HIP-VAL on the square) and the lower one is for common rafters (labelled COMMON on the square).

Light Weight

Over standard Aluminum alloy material offers super light weight.Makes it convenient to carry with.

Easy Conversion

Conversion table between inch and angle makes conversion at a glance, takes away the need to drag out a calculator.

Precise and Durable

CNC-machined edges enhance the precision and durability, withstand the rigors of daily use.


	Wood moisture meter	Digital level	Rafter square	Miter saw protractor	Digital angle gauge	Combination square
Range	0-100%	0-180°	0-300mm	0-360°	0-180°	0-300mm
Tolerance	±0.1%	±0.05°	±0.1mm	±0.1°	±0.05°	±0.1mm
Battery	2 AAA batteries	1.5V AAA batteries	no battery included	no battery included	2 AAA batteries	no battery included
Display	Back-lit LCD	Back-lit LCD	/	/	High visibility reverse contrast	/
Application	For home inspectors, architects, contractor, painters and homeowners to detect mold and dampness. Widely used in woodworking, cabinet-making, flooring, measuring construction lumber, pallets, drying wood or testing firewood for moisture detection.	Use as digital level, measure/set angles, check relative angles. High visibility reverse contrast display auto-rotates when turned. Strong magnetic base and v-grooves all around fit conduit contour.	Suitable for the measurement, Mecurate rafter square can be used as a protractor, woodworking compass, triangle square and frame square. The horizontal base is convenient for marking, smooth and practical.	It can measure the angle of inner corner and outer corner. Refer to the conversion table, you would easily get the right angle for miter saw cut. With accurate measurement, you can accomplish with one cut to get perfect joint surface.	The angle gauge is portable and convenient, especially useful for completing work on ladders, roofs or other dangerous locations, it can be used in woodworking, welding, fabrication, construction, machinery, home renovation, automobile etc.	Great for marking 45 and 90 degree angles, and can also function as a handy gauge for transferring precision angles and other measurements; essential for use in your rafter, deck, stair and roofing projects, and in other general carpentry operations