[110v]
[220v]
How to preventing heating of the handle
Please take out a proper amount of excess lubricating oil from the handle to prevent the heat generated by the friction lubricating oil during high-speed rotation of the bearing.
Due to the inevitable thermal energy generated by the operation of the motor, do not step on the foot within 10 minutes of each use
or when the temperature reaches about 40 ℃, and the handle can continue to be used after cooling down.
Characteristics:
1.Hanging the host machine above the workbench can save more space and facilitate operation.
2. ABS industrial plastic electronic pedal, light weight. When used, it will not generate heat and prolong the service life of the switch.
3. Up-pressure decelerates and down-pressure accelerates. Through the foot pedal control speed, easy to operate.
4. The engraving speed can be changed at any time, and the hands and feet can be used at the same time to improve the working efficiency.
5. Tighten the screw at the bottom of the pedal to directly control the corresponding speed and adjust it arbitrarily (the tighter the screw, the faster the speed).
6. Low noise, only slight vibration of the handle, long working hours are not easy to fatigue.
Parameters:
Voltage:110V
Frequency: 50/60Hz
Power:200w
No load speed: 18000-20000/rmp
Load output power: 28000R/min
The tip of diameter : 4mm/6mm
Weight: 4kg