SANDING

Sanding discs: There are four different types of the sanding discs in this rotary tool accessories kit, ideal for many types of surfaces such as: soft and hard woods, chip boards, fiber boards, non-ferrous metals, plastic, cork, rubber, minerals.

Sanding bands & flap wheels are used to sanding and shaping wood, plastic, fiber glass and light deburring.

Sanding drums fit any brand of sanding bands.

This sanding accessories will take care of your surface preparation and finishing needs.

CLEANING & POLISHING

Felt wheels & cloth wheels perfect for various molds, electronics, glass, medical equipment, gold, silver jewelry & metal surface grooves.

Brass brush is high elasticity and high temperature resistance, it can easily remove rust, paint, dust and burrs on metal & wood surfaces, smooth welding spatter.

Stainless brush suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue.

PP brush is used for cleaning and polishing fragile surfaces.

ENGRAVING

The diamond burr bit is applied to detail work, engraving, touch-up and finishing. It use on ceramics, tiles, brick, glass, plastics, fiberglass, jade, steel and wood and other hard materials.Be sure to put it in water to cool since dry drilling will make the diamond head graphitized if overheating, then it will be quickly worn out.

HSS milling cutters with the hardness of HRC60 up after the heat treatment, it can be used for carving, hollowing, grooving and polishing on wood and plastic.

DRILLING

HSS twist drills perfect for wood, soft steel, soft metals, fiberglass and also suitable for plastic, walnut, amber, beads, beeswax, olive nut and small model kit etc.The various shapes can make it suitable for almost all grinding conditions.

GRINDING & SHARPENING

Green silicon carbide grinding wheel applies to grinding crushed glass, ceramic tiles and high tensile strength metals.

Aluminum oxide grinding wheel applicable to grinding, deburring, chamfering of carbon steel, high speed steel and quenched steel ect.

CUTTING

Cut-off wheels for cutting of sheet metal, thin wood and plastics.

Fiberglass reinforced cut-off wheels for cutting frozen bolt heads or screws or for making slots in rusted.

Diamond cutting disc is especially for glass, ceramic, jade, floor tile.

SANDING DRUM KIT

Align the sanding drum and band,then press the band into the drum,and finally use a screwdriver to twist the drum screw.

Rip off the white paper of the sanding paper, then align the sanding paper with the sanding pad.

Wrench is used to unscrew, fasten chuck nut and mandrel, and change accessories.

MANDREL

The mandrel with red plastic shim is used to adapt the cutting discs, sanding discs and grinding wheels.

The mandrel with silver metal shim is for cloth wheel.

The mandrel with screw is for felt discs.

COLLECT

The collects are made from tin-bronze which has a better performace on elasticity, wear resistance and diamagnetism than the normal copper one.

The specifications are 2*1/8” , 1*3/32” and 1*1/16”.

The collects set fit a variety of accessories with different shank sizes to your rotary tool.