Feature

●Specifications: 1-1/2" cutting diameter; 1/2" shank; 7/9"(20mm) cutting depth; 2-2/7(58mm) overall length. Industrial quality tungsten carbide bottom cleaning router bits. Suitable for wide ranges of applications
●Applications: Cuts all composition materials, plywood, hardwoods, and softwoods, chipboard, and MDF etc. Great for cutting square grooves, and cleaning out dadoes. Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 8-12M/Min; suggested spindle speed: 18000-24000RPM
●Features: Industrial grade carbide tip with sharp cutting edge, high hardness and long life. Solid hardened steel (45+hardness) body with anti-kickback design. Be sure to use only router bits and accessories designed for the router.
●Easy to Use: Use on electric router, carving machine, edge trimmer, CNC and other automatic routers. All bits must be inserted in the collet in full length.The tool shank should be installed with a clamping depth of at least 1-inch to maintain the proper pressure carrying range. The larger the tool diameter, the smaller the spindle speed should be.
●Tips: Always choose a router bit with a longer cutting edge than the workpiece. For example, use a tool with 1-inch cutting edge length when milling grooves of 1/2-inch depth. (It is NOT recommended that the cutting edge length equal to or less than 1/2-inch)

[1 & 2 x 7 & 8 ]

[1 & 2 x 1-1 & 8 ]

[1 & 2 x 3 & 8 ]

[1 & 2 x 1-1 & 2 ]

[1 & 4 x 7 & 8 ]

[1 & 2 x 2 ]

Description

Product Introduction

Fully heat treated shank and body for durability. The anti kickback design ensures safe installation. Bottom cleaning router bit is with high hardness, long life and resulting in nice finishing on woody pieces after cutting.
The shank has uneven contact marks or grooves when clamping. It means that there is skidding and the clamp cover hole changes. Should promptly replace the clamp cover so as to avoid accidents.
Be sure to use the right size clamp cover to avoid vibration or broken shank to make the bit fly off. Always keep the router bits clean, and need to add machine oil to prevent rusting. Never change the form of the bit.

Wide Applications

Especially suitable for composition materials, softwoods, hardwoods, chipboard, plywood etc.. Excellent for cutting the mortise for butt door hinges.
Good for flat surfacing in the wood work project for any art or craft. Great replacement bit tool for woodworking carpenter.
Please avoid cutting ferrous metal and non wood materials, such as steel, iron, sand, etc..

Applicable Equipment

Suitable for all range of routers, such as handheld router, table router, electric router, carving machine, edge trimmer, CNC and other automatic routers. Cannot be used on electric drill and drill press etc..
Shanks of all bits must be inserted in the clamp cover in full length to offer enough clamping force and avoid causing damage to the bits.


Carbide Tip Tungsten carbide tip is precision ground, smooth and no burrs. Two carefully engineered flutes cut aggressively and cleanly.	Surface Treatment Processed by spray-painting technology for elegant appearance, rust prevention and corrosion resistance.	Multi-use Good for spoil board surfacing and square groove cutting. It leaves a smooth, clean finished surface. Perfect for milling round, square or flat stock.	Universal Shank Steel round shank is heat-treated for hardness and rigidity. can be used with a wide variety of tool holding systems.

Important Notices:

1/4" shank router bits are suitable for the edge trimmer, and 1/2" shank router bits are suitable for the carving machine, CNC machine.
In order to avoid vibration and for maximum cutting quality, try to choose a router bit with the shortest cutting edge under precondition of satisfying requirement.
Please take protective measures to prevent wood chips splash from hurting your skin and eyes, and notice the damage of packaging and shipping.
If the router bit bounces, stop working immediately and re-clamp until full contact before working. Please replace it with a new one If the router bit is blunt.


	Extra Long Straight Bit	Corner Rounding Bit	V-Groove Bit	Cove Box Bit	Round Nose Bit	Keyhole Bit
Size	1/2" x 1/2" x 3"	1/2" x 1-1/2"	1/4" x 1/2"(60°)	1/2" x 1"	1/2"x 1"	1/4"x 3/8"
Tip Material	Tungsten Carbide	Tungsten Carbide	Tungsten Carbide	Tungsten Carbide	Tungsten Carbide	Tungsten Carbide
Flute/Teeth Quantity	2 Flutes	2 Flutes	2 Flutes	2 Flutes	2 Flutes	2 Flutes

Product Introduction

Wide Applications

Applicable Equipment

Carbide Tip

Surface Treatment

Multi-use

Universal Shank

Important Notices: