Feature●Domestic Shipping●A_GEN_TAXDescription
Organize your cables with professional desk and cabinet cable-pass through grommets. Cut hole to size specified and either press or glue into place.
Specifications:
- Hole Size Required: 2.0.
- Grommet Insert Width: 1.960
- Grommet Lid Width: 2.4375
- Grommet Depth: .625
- Inside Usable Diameter (Approx): 1.75
- Size Tolerances May Vary
Important Installation Note: The Grommets are manufactured to be slightly less that the hole size. For example if we have a grommet advertised at 2.0 inches (example size ONLY) when measured on a caliper it will measure at approx. 1.960 inches - or approx .04 inches LESS than the hole size of 2 inches. This difference is by design to allow for the grommet to be inserted into the CUT hole size. These grommets after inserted into a cut hole are intended to move freely. If you need a TIGHT fit a small amount of glue or silicon may be needed.
Please see technical drawing (Product Manual) below for size and shape details.