STEP 1: Drill a hole on your plate ( refer to the size of "Drill Hole Diameter")
STEP 2: Open a proper holes for your wire on the grommet (Use a knife to open a hole on the grommet)
STEP 3: Make sure the plate is stuck into the grommet‘s groove.
STEP 4: Through out your wire , the cables, etc..
The grommets offers a wide selection of diameters, tight or loose your cord, please make center holes as needed.
NOTE:
The grommets are mainly used for protecting the wires, the cords and the pipes away from rough surfaces.
If used as a plug stop, it can only meet the ordinary waterproof requirements.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|---|
Wire Grommet | Wire Grommet | Wire Grommet | Wire Grommet | Wire Grommet | Wire Grommet | |
Mounting Size | 60mm x 30mm | 80mm x 30mm | 14mm | 25mm | 30mm | 30mm |
Groove Thickness | 2mm | 2mm | 1.5mm | 2.8mm | 3mm | 3mm |
Shape | Oval | Oval | Conical | Conical | Conical | Conical |